What Jobs are available for Semiconductor Engineering in Hong Kong?

As an innovative spin-off from the Hong Kong University of Science and Technology (HKUST),  we are dedicated to pioneering the futureof robotics .

We specialize in developing high-precision tactile sensors that grant robots a genuine sense of "touch ."  This capability is set to advance intelligent robotics technology to new heights .

Our vision is supported by significant backing, including tens of millions of HKD in R&D funding from the Hong Kong SAR Government and investment from top-tier venture capital firms .

我们是一家源自香港科技大学的前沿科技公司,专注于为机器人研发高精度触觉传感器,赋予机器人真实的"触觉"能力。这项技术突破将推动智能机器人技术迈向新高度。该愿景获得了香港特区政府数千万港元研发资金及顶级风险投资机构的鼎力支持。

1. Hardware System Design

(1) Participate actively in the full product

development lifecycle ;

(2) Design circuit schematics and develop

substrate/PCB layouts ;

(3) Optimize sensor power supply and energy consumption ;

(4) Collaborate with PCB/substrate/FPC

suppliers,conducting Design for Manufacturability (DFM) reviews. Perform signal integrity (SI) and power integrity (PI) simulations and implement optimizations .

1. 硬件系统设计

(1) 深度参与完整产品开发周期;

(2) 设计电路原理图并开发基板/PCB布局;

(3) 优化传感器供电与能耗管理;

(4) 协同PCB/基板/FPC供应商进行可制造性设计评审(DFM),执行信号完整性(SI)与电源完整性(PI)仿真,并根据结果实施优化。

2. Embedded Software Develop

(1) Responsible for setting up the product's embedded environment and driver development ;

(2) Participate in analyzing and designing embedded technology solutions ;

(3) Responsible for identifying and resolving embedded issues during product development and writing technical documentation .

2. 嵌入式软件开发

(1) 负责搭建产品嵌入式环境及驱动开发;

(2) 参与嵌入式技术方案分析与设计;

(3) 负责产品开发过程中的嵌入式问题定位与解决,编写技术文档。

3. Validation And Testing

(1) Build hardware test platforms for evaluating new electronic devices and components for potential use in future products ;

(2) Conduct simulations and physical testing to validate the design, including circuit analysis, electromagnetic analysis, EMC/EMI requirments/regulations ;

(3) Stay up-to-date with the latest trends and developments in electronic design and apply them to the design process .

3. 验证与测试

(1) 搭建硬件测试平台,评估新型电子器件在未来产品中的应用潜力;

(2) 通过仿真与物理测试验证设计(含电路分析、电磁分析、EMC/EMI合规性验证);

(3) 追踪电子设计前沿技术并应用于开发流程。

1.Bachelor's degree or higher in Telecommunications, Electronics, CS, Automation, EM/Microwave Engineering, or related fields ;

2.Proficient in at least one EDA ;

3.Have ability to design and develop schematic and 4-layer PCB independently ;

4.Experienced with at least one mainstream MCU(STM32, ESP32, etc.) ;

5.Experience with C/C++ programming ;

6.Knowledge of safety compliance (EMC, etc.) with rich debugging/troubleshooting experience ;

7.Familiar with common communication protocols (UART/I2C/SPI, etc.) ;

8.Skilled in hardware test equipment (oscilloscopes, multimeters, etc.) ;

9.Proficient in sensor signal conditioning circuits (amplification/filtering/isolation) ;

10.Proficient in written and spoken Mandarin and English ;

11.Must hold or be able to obtain full working rights in Hong Kong before onboarding.

Location: Nanshan District, Shenzhen;

12.Priority given to:

• Participants of Robocon/RoboMaster robotics competitions ;

• Candidates with full product lifecycle experience ;

• Those with robotics industry exposure .

• 通信工程、电子工程、计算机、自动化、电磁与微波技术等相关专业本科及以上学历,2年以上相关工作经验;

• 精通至少一种EDA工具;

• 具备独立设计原理图及4层PCB的开发能力;

• 熟悉至少一款主流MCU(如STM32/ESP32等);

• 具有C/C++编程经验;

• 掌握安规标准(如EMC等),具备丰富调试/问题排查经验;

• 熟悉常用通信协议(UART/I2C/SPI等);

• 熟练操作硬件测试设备(示波器、万用表等);

• 精通传感器信号调试电路设计(放大/滤波/隔离);

• 具备中英文书面及口语沟通能力;

• 须持有或能在入职前获取在香港合法工作的权利,工作地点在深圳市南山;

• 优先考虑:

● 参加过Robocon/RoboMaster等机器人大赛者;

● 具有完整产品开发流程经验者;

● 具备机器人行业经验者。

Recruit Ref: L

Posting Date:

Integrated Corporation

Junior Hardware Engineer / Hardware Engineer

Responsibilities

• Embedded system and Electronics digital/analogue circuit design development experience for security products
• Independent role in handling design, testing, troubleshooting, and improvement that may arise during product development
• Working closely with other ENGs and PM team members, from concept to launch
• Logical thinking and good communication with customers, suppliers, and production teams on technical communications
• Conduct simulations and physical testing to validate the design, including circuit analysis, electromagnetic analysis, EMC/EMI requirements/regulations
• Stay up-to-date with the latest trends and developments in electronic design and apply them to the design process

Requirements

• High Diploma or above in Electronic Engineering or a related discipline
• Technical knowledge in hardware design, PCB layout, circuit design, etc
• Excellent command of Cantonese, Mandarin, and English, both spoken & written
• Less experience will consider as assistant hardware engineer

Industry:

Engineering / Electrical / Electronics

Job Category / Function:

Engineering (Electrical / Electronic)

Professional Services (Others)

Job Position Level:

General

Employment Term:

Full Time

Min. Edu. Level Req:

Diploma

Minimum QF Level attained:

-

Total Working Exp:

-

Salary(HKD):

-

Location:

Central & Western District / Central

Benefits:

-

Responsibilities

1. Embedded system and Electronics digital/analogue circuit design development experience for security products
2. Independent role in handling design, testing, troubleshooting, and improvement that may arise during product development
3. Working closely with other ENGs and PM team members, from concept to launch
4. Logical thinking and good communication with customers, suppliers, and production teams on technical communications
5. Conduct simulations and physical testing to validate the design, including circuit analysis, electromagnetic analysis, EMC/EMI requirements/regulations
6. Stay up-to-date with the latest trends and developments in electronic design and apply them to the design process

Requirements

1. High Diploma or above in Electronic Engineering or a related discipline
2. Technical knowledge in hardware design, PCB layout, circuit design, etc
3. Excellent command of Cantonese, Mandarin, and English, both spoken & written
4. Less experience will consider as assistant hardware engineer

Senior R&D Hardware Engineer

The Engineer will be responsible for Internet-of-Things (IoT) products development. He/She will be assigned to work with our R&D team in HKSTP. The position will focus on the development process from initial technical research, prototypes preparation, engineering samples build, testing and validation, product certification to mass production. The candidate will also have a chance to work with our R&D team internationally.

Responsibilities:

• Responsible for the IoT products hardware design based on required product specification.
• Definition of system/subsystem architecture and design target.
• Define testing and validation procedures and methodology.
• Schematic design, Bill-of-material (BOM) generation, components selection/validation and costing preparation.
• Work with mechanical engineer, PCB layout engineer and project leader to complete the project tasks.
• Occasional travel to PRC supporting R&D activities may be needed depending on project requirement.

Requirements:

• Degree or above in Electronic Engineering, Communication Engineering or related disciplines.
• Sound and solid design and implantation experience with ZigBee, Bluetooth, Z-wave, LoRA and Wi-Fi technologies.
• Sound and solid schematic design experience on analog and digital circuit, including AC/DC, DC/DC, re-chargeable batteries charging circuit, I2C, SPI and DDR RAM interface circuitry.
• Familiar with hardware validation test and regulatory approval such as safety and EMI test.
• Knowledge of different types of sensing technologies (PIR, microwave, ultrasonic, PM2.5 and etc.) will be ad added advantage.
• Knowledge of microcontroller programming (C/C++, assembly) will be an added advantage.

Senior R&D Hardware Engineer

The Engineer will be responsible for Internet-of-Things (IoT) products development. He/She will be assigned to work with our R&D team in HKSTP. The position will focus on the development process from initial technical research, prototypes preparation, engineering samples build, testing and validation, product certification to mass production. The candidate will also have a chance to work with our R&D team internationally.

Responsibilities:

• Responsible for the IoT products hardware design based on required product specification.
• Definition of system/subsystem architecture and design target.
• Define testing and validation procedures and methodology.
• Schematic design, Bill-of-material (BOM) generation, components selection/validation and costing preparation.
• Work with mechanical engineer, PCB layout engineer and project leader to complete the project tasks.
• Occasional travel to PRC supporting R&D activities may be needed depending on project requirement.

Requirements:

• Degree or above in Electronic Engineering, Communication Engineering or related disciplines.
• Sound and solid design and implantation experience with ZigBee, Bluetooth, Z-wave, LoRA and Wi-Fi technologies.
• Sound and solid schematic design experience on analog and digital circuit, including AC/DC, DC/DC, re-chargeable batteries charging circuit, I2C, SPI and DDR RAM interface circuitry.
• Familiar with hardware validation test and regulatory approval such as safety and EMI test.
• Knowledge of different types of sensing technologies (PIR, microwave, ultrasonic, PM2.5 and etc.) will be ad added advantage.
• Knowledge of microcontroller programming (C/C++, assembly) will be an added advantage.

Senior R&D Hardware Engineer

The Engineer will be responsible for Internet-of-Things (IoT) products development. He/She will be assigned to work with our R&D team in HKSTP. The position will focus on the development process from initial technical research, prototypes preparation, engineering samples build, testing and validation, product certification to mass production. The candidate will also have a chance to work with our R&D team internationally.

Responsibilities:

• Responsible for the IoT products hardware design based on required product specification.
• Definition of system/subsystem architecture and design target.
• Define testing and validation procedures and methodology.
• Schematic design, Bill-of-material (BOM) generation, components selection/validation and costing preparation.
• Work with mechanical engineer, PCB layout engineer and project leader to complete the project tasks.
• Occasional travel to PRC supporting R&D activities may be needed depending on project requirement.

Requirements:

• Degree or above in Electronic Engineering, Communication Engineering or related disciplines.
• Sound and solid design and implantation experience with ZigBee, Bluetooth, Z-wave, LoRA and Wi-Fi technologies.
• Sound and solid schematic design experience on analog and digital circuit, including AC/DC, DC/DC, re-chargeable batteries charging circuit, I2C, SPI and DDR RAM interface circuitry.
• Familiar with hardware validation test and regulatory approval such as safety and EMI test.
• Knowledge of different types of sensing technologies (PIR, microwave, ultrasonic, PM2.5 and etc.) will be ad added advantage.
• Knowledge of microcontroller programming (C/C++, assembly) will be an added advantage.

Job Types: Full-time, Permanent

Pay: $25, $31,000.00 per month

Benefits:

• Dental insurance
• Medical Insurance

Work Location: In person

Post: (Senior) Electronics / Firmware Engineer

Accue Co. Ltd is a Hong Kong since We are the leading synchronized clock maker in HK.  Our products are widely used in hospitals and schools, and will start health related products.  We do circuit, software and industrial design in HK, and market the products under our own brand name "ACCUE".

Job Description

• Digital and/or analog circuit, firmware and PC software design.
• Prototype making.
• Support production.
• Design automatic test jigs and automatic production tools.

Job Requirement

• Degree holder in Electronics / Computer Engineering or equivalent.
• Product design, production automation.
• At least 2 years related experience especially in embedded system.
• Knowledge on C, C++, C#, etc.
• Able to use AI tools to help programming.
• Experience in WiFi programming is an advantage.
• Experience in iOS/Android/Windows apps programming is an advantage.
• With more experienced and good leadership, will be considered as senior engineer.

Working Environment:

• 5 days,
• Bank holiday,
• Working place is next to Lai Chi Kok MTR station.

For interested party, please send your resume with salary expected to  Looking forward to working with you soon.  Thank you

Recruit Ref: L

Posting Date:

Beeinventor Limited

Electronics Engineer

We are BeeInventor, a company focusing on construction technologies. We are seeking an Engineer to join our team. We have a suite of IoT solutions to improve health and safety of construction personnel. They can be found at which is novel, patented and potential for worldwide adaption.

Responsibilities :

• To assist in innovative product development from conceptual stage to production stage
• To assist in product testing, verification, and trouble-shooting.
• To handle the ad-hoc tasks as assigned by supervisor

Requirements :

• Higher Diploma, Degree or above in Electronic Engineering or equivalent
• 1-2 years of relevant industrial experience in product development.
• Candidate with less experience or fresh graduates are welcome to apply.
• Knowledge in MCU-based circuit design, industrial standard interfaces, PCB layout and troubleshooting
• Practical experience in embedded C programming
• Team work with good communication skills
• Good command of English and Chinese (Cantonese & Mandarin) .

We offer competitive remunerations, flexible working hour, 20 day annual leave and most importantly, blue sky opportunities to grow as we have only a few members now.

Interested candidates please send CV and expected salary to us and to let us understand you more you are welcome to send us examples of projects you did.

Industry:

Information Technology

Job Category / Function:

Engineering (Electrical / Electronic)

Professional Services (Others)

Job Position Level:

General

Employment Term:

Full Time

Min. Edu. Level Req:

Diploma

Minimum QF Level attained:

-

Total Working Exp:

-

Salary(HKD):

-

Location:

Kwun Tong District / Kowloon Bay

Benefits:

-

Responsibilities:

• Solid embedded system and Electronics circuit design development experience for power products
• Independent role in handling design, testing, troubleshooting, and improvement that may arise during product development.
• Working closely with other ENGs and PM team members to participate in NPD Projects, from concept to launch.
• Logical thinking and good communication with customers, suppliers, and production teams on technical communications
• Conduct simulations and physical testing to validate the design, including circuit analysis, electromagnetic analysis, EMC/EMI requirements/regulations
• Stay up-to-date with the latest trends and developments in electronic design and apply them to the design process

Requirements:

• Degree in Electronic Engineering or a related discipline
• At least 3 years of experience in electronics design and product development, power product experience is preferred.
• Knowledge of NPD Process, Experience in handling DFMEA, PFMEA, PPAP Process
• Experience in development at one of the following areas will be an advantage:
• Power supply design, such as inverter, DC-DC converters or AC-DC converters
• RF knowledge such as measurement and tuning of antenna. antenna design in BLE or wireless power transfer
• Hardware design of sensors
• Strong technical knowledge in hardware design, PCB layout, circuit design in Altium
• Excellent command of Cantonese, Mandarin, and English, both spoken & written
• More experienced candidates can be considered as Senior Electronic Engineer, Hardware

What We Offer:

• A strong, professional background & infrastructure
• Continuous professional development opportunities
• Diverse, exciting, individual tasks & projects
• 5 days' work week with flexible working hours
• days of annual leave
• Birthday leave + Marriage leave + Maternity leave + Compassionate leave
• Double pay + Performance bonus

How to Apply:

Does this role sound like something up your alley or better, your dream job? Click the "apply" button below.

For more information, please visit our website:

Personal data collected will be used for recruitment purpose only.